1. Find the Items you want. 2. Put into Shopping Cart 3. Process to Checkout 4. Enter a Shipping Address >> Review and Submit Your Order >> Finish Payment >> Check Order Sation. Invoice number and your payment information will show in this page. |
About Order Shipping and Tracking 1) shipping way (chanle) different, the cost and time are different: Small parcel: door to door 15-45days; it is better for small order under 1 KG; the freight is lower. By train, or Sea; door to door; or to port; 2-3USD/KG; 20-40 days; |
Model:BT-7008 |
1. Avoid danger |
2. Better Polishing Power |
3. Avoid aurora |
4.Nice for any car washer |
5.Easy to use |
The outer ring has five eccentricity at the position of (2, 4, 6, 8, 10), each of which is a multiple of the number. For example: a card at number 8, the eccentric distance is 16mm. |
The aligning center is a bit, and when the work is kept rot- ating, the position of the head can be adjusted, and it is difficult to prevent the steel ball from falling because of holding the vibration part of the bottom and the outer ring. If the numbers are out of order, adjust the balance plate and the numbers, adjust the width of each turn in the opp- osite direction, two millimeters, and adjust again and again. |
Adjust Eccentric according to the different polisher and pads; The outer ring has five eccentricity at the position of (2, 4, 6, 8, 10), each of which is a multiple of the number. For example: a number at 8, the eccentric distance is 16mm. The aligning center is a bit, and when the work is kept rotating, the position of the head can be adjusted, and it is difficult to prevent the steel ball from falling because of holding the vibration part of the bottom and the outer ring. If the button can not be played, the 1 balance plate and the figures do not match, the reverse direction of the two direction adjustment of a few millimeters, repeatedly adjusted. 2. Hold the button with your fingertips, press it hard, press the nail tip to the stop position, adjust it and stop when the button pops up. |